A Comprehensive Framework For Mix Proportioning Of Is Method For Hsc
DOI:
https://doi.org/10.63856/ijis/v2i7/06Keywords:
Superplasticizer, Fly ash, Silica fume, High Strength, admixture.Abstract
In construction industry most widely use material is concrete in the world. It is made of cement, fine aggregate, coarse aggregate, and water. But high-strength concrete is the concrete having high compressive strength, high density, and very low permeability. High-strength concrete is made by replacing cement with mineral admixtures like silica fume, fly ash, etc. To prepare high-strength concrete several changes have to be made like water content, replacement of cement by admixture, and addition of superplasticizer.
References
1. Study on Strength Development of High Strength Concrete Containing Fly Ash and Silica fume” A R Hariharan, A S Santhi, G Mohan Ganesh. International Journal of Engineering and Technology (IJEST), ISSN :0975-5462, Vol. 3 No. 4 April 2011
2. STUDY OF PARTIAL REPLACEMENT OF CEMENT BY SILICA FUME” Lakhbir Singh, Arjun Kumar, Anil Singh International Journal of Advanced Research (2016), Volume 4, Issue 7, 104-120, ISSN 2320-5407
3. Analysis on Mix Design of High Strength Concrete (M90)” Chaitanya Raj, Divyanshi Tyagi, Gaurav Budhani International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056, p-ISSN: 2395-0072, Volume: 05 Issue: 06, June-2018
4. HIGH STRENGTH CONCRETE: A REVIEW” Prashant m. Dhamanage, Mysore V. Nagendra International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056, p-ISSN: 2395-0072, Volume: 07 Issue: 08, Aug 2020
5. Effect of admixtures on the setting times of high-strength concrete” J.J. Brooks, M.A. Megat Johari, M. Mazloom Cement & Concrete Composites 22 (2000) 293-301.
6. [6] “Effect of silica fume on mechanical properties of high-strength concrete” M. Mazloom, A.A. Ramezanianpour, J.J. Brooks Cement & Concrete Composites 26 (2004) 347–357
7. IS 456: 2000 code of practice for Plain and Reinforced Concrete (Fourth Revision).
8. IS 10262: 2019 Guidelines for Concrete Mix Proportioning (Second Revision).
9. L. Zhang, Z. Zhang, and W. Zhao, “Compatibility between polycarboxylate superplasticizers and supplementary cementitious materials,” Construction and Building Materials, vol. 259, 2020.
10. American Concrete Institute (ACI), ACI 211.1: Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete, ACI Committee 211, Farmington Hills, MI, USA, 1991.
11. R. N. Swamy and B. Vijaya Rangan, “Durability of concrete,” ACI SP-100, Detroit, MI, USA, 1987.
12. J. Newman and B. S. Choo, Advanced Concrete Technology: Mix Design and Construction. Oxford, UK: Elsevier, 2003.
13. American Concrete Institute (ACI), ACI 211.4R: Guide for Selecting Proportions for High-Strength Concrete Using Portland Cement and Other Cementitious Materials, ACI Committee 211, Farmington Hills, MI, USA, 2008.
14. E. Fuller and S. E. Thompson, “The laws of proportioning concrete,” Transactions of the American Society of Civil Engineers, vol. 59, no. 2, pp. 67–143, 1907.
15. C. L. Andersen and H. H. Andersen, “Particle packing and concrete mix design,” Powder Technology, vol. 130, no. 1–3, pp. 266–269, 2003.
16. European Federation of Concrete (fib), fib Model Code for Concrete Structures 2010. Ernst & Sohn, Berlin, 2013.
17. J. Stark and B. Wicht, Cements and Their Reactions. London, UK: CRC Press, 2000.
18. F. Golafshani, H. Rahai, and M. Safi, “Predicting the compressive strength of high-performance concrete using artificial neural networks,” Computers & Concrete, vol. 7, no. 3, pp. 279–293, 2010.
19. T. C. Powers, “Structure and physical properties of hardened Portland cement paste,” Journal of the American Ceramic Society, vol. 41, no. 1, pp. 1–6, 1958.
20. S. Mindess, “The significance of materials science to concrete technology,” Materials Science Forum, vol. 79–82, pp. 1–32, 1991.
21. S. H. Aïtcin and R. Pleau, High-Performance Concrete and Applications. London, UK: CRC Press, 1998.
22. P. K. Mehta, “Reducing the environmental impact of concrete,” Concrete International, vol. 23, no. 10, pp. 61–66, 2001.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
